Standards
Down

Standards

Model Vulcan-sCL PE4 Full Plus
Camera Link Mode Base/Medium/Full/Full+
Interface Standard Camera Link 2.0
[object Object] 8/10/12/14/16 bit
Tap Arrangement 1 Tap-8/10/12/14/16-bit Mono/Bayer
1 Tap-8/10-bit RGB/BGR/RGBC/BGRC
2 Taps-8/10/12/14/16-bit Mono/Bayer
2 Taps-8/10-bit RGB/BGR/RGBC/BGRC
3 Taps-8/10/12/14/16-bit Mono/Bayer
3 Taps-8-bit RGB/BGR
4 Taps--8/10/12-bit Mono/Bayer
8 Taps-8/10-bit Mono/Bayer
10 Taps-8-bit Mono/Bayer
Scan Type Area scan / Line scan
Resolution Support Level(min/max): 128 pixels / 64K pixels;
Vertical(min/max): 1 line / (Area array 256M / horizontal resolution), (Line scan unlimited)
Pixel Clock 20-85MHz
Onboard Memory 512 MB
Output Data Rate 850 MB/s(max)
Communication Method Support computer serial communication;
1200-921600bps
Trigger Input Support 2 signals inputs(photoelectric isolation);
Maximum frequency 68kHz;
Level standard supports RS422;
TTL and differential input (3.3-24V)
Encoder Input Support 1 orthogonal AB phase input (photoelectric isolation);
Maximum frequency 2MHz;
Level standard supports RS422;
TTL and differential input (3.3-24V)
Inter-board Synchronization Support multi-card synchronization (up to 4 capture cards);
The synchronization delay is less than 25ns
Flash Control Support 2 signal output (photoelectric isolation);
Maximum frequency 40kHz
Secondary Development Complete SDK packages; Supporting C/C++/C# language
System Requirement Operating Windows 10/7(64-Bit/32-Bit), Linux 64-Bit, Mac OS;
Hardware: PCIe 2.0 × 4 Slot
Connector SDR

Related Parts